PSX-6080 (1500HP)scrap steel shredder
Shredder is a machine that tears large scrap into smaller portions of higher density that are free from rust and dust by hammers. These hammers beat, and shear the scrap fed into the machine until it is converted into the sheave size which is provided at the bottom structure of the machine. And with the help of magnetic separator, certain size of scrap ferrous will be collected.
I. main performance parameters
| item |
value |
| productivity |
25 ~ 35t / h (automobile shell, grid: 150 mm × 150 mm) |
| shredder power |
1120KW(1500HP) |
| Max feeding width |
2000mm |
| Max working diameter of rotor |
1510mm |
| power of other motors |
~280kW(including de-dusting system) |
| footprint area |
according to the final confirmed layout |
Note: the capacity of shredder is related to many factors such as raw material type, feeding speed, grid hole size and operator proficiency.
The output in this table is only for reference.
II. Processing materials
The following raw materials can be processed:
- Some car shells (excluding axle, oil tank, battery, gearbox, engine, etc.) that have been flattened or not flattened;
- "White goods" such as home appliances, washing machines, refrigerators, etc;
- Bicycles, motorcycles without fuel tanks, etc;
- Other materials suitable for shredding;
Materials that cannot be shredded as below:
- Steel wire rope, cable, rebar and other slender and easily wound materials;
- Alloy steel, high carbon steel, low carbon steel and other solid shafts;
- Steel pipes with wall thickness greater than 4mm or diameter greater than 200mm;
- Plates with a thickness of more than 15 mm and a maximum overall dimension which is more than 150 mm;
- Structural sections with the thickest section more than 10 mm;
- Ingots, billets and similar materials;
- Gas tank, oxygen bottle, paint barrel, etc. dangerous and explosive closed containers;
The items listed above are not complete, only for reference. The items that are more fragile than the items listed above are considered to be shredded.
| Production rate |
18~28 t/h |
| Shredder power |
750 KW(1000Hp) |
| Max. feeding width |
2000mm |
| Total power |
952kW |
| Production line floor area |
75.4m×35.1m |
1.One year guarantee and lifelong maintenance.
2.one set of oil seals for free.
3.Remote assistance and trouble shooting for free.
III. supply equipment
1. Crawler apron conveyor
| Technical parameters |
| conveying length |
approximate 17.7m in total |
| conveying width |
2m |
| conveying angle |
23° |
| rated conveying speed |
9m/min(adjustable) |
| driving power |
30kW |
2. Double drum feeding roller
| Technical Parameters |
| Chute length |
6.09m |
| Chute width |
2.2m |
| Drum diameter |
900mm |
| Min feed opening |
~90mm |
| Max feed opening |
~1.1m |
| Driving power |
2x22kw |
| Cylinder force |
2x250kN |
3. Shredder
| Technical Parameters |
| Productivity |
25~35 tons / hour
(car shell, grid 150 mm × 150 mm) |
| Rotor speed |
740rpm |
| Power |
1120kW |
| Hammer rotation diameter |
1510mm |
| Number of hammer |
10 |
| Ejecting cylinder |
2x160KN |
| Pin pulling cylinder |
660KN |
| Pin pulling cylinder |
2x660KN |
| Cover cylinder |
150mm x150mm |
4. High voltage motor and high voltage control cabinet
| Technical Parameters |
| Rated power of high voltage motor |
1120kw |
| Rated voltage of high voltage motor |
10kV |
| Rated frequency of high voltage motor |
50Hz |
| Synchronous speed of high voltage motor |
740r/min |
5. Vibrating conveyor
Technical Parameters
Chute length 4.7m
Chute width 1.6m
Vibration motor power 2x5.5kW
Amplitude 5~6mm
6. Discharge belt conveyor
7. Magnetic separation system
8. Stacking conveyor
9. Non-magnetic material conveyor
10. Hydraulic system
11. Bearing lubrication system of shredder
12. Water spray system
13. Electrical control system
14. Dedusting system
15. Video surveillance
so on......
The above parameters are for reference only. The specific scheme shall be subject to the technical agreement confirmed by both parties.Our company can customize according to different customer requirements, welcome to consult! For more details, please contact the overseas department of Hubei Lidi Machine Tool Co., LTD.
COMPANY INTRODUCTION
Hubei Lidi Machine Tool Co., Ltd. was founded in 1969 and is currently affiliated to Tianqi Group (stock code: 002009). The company is located in Yichang, Hubei. It is a national key high-tech enterprise. It covers an area of 8000 square meters and owes 3 professional subsidiary companies and 10 service companies which are in Tianjin, Tangshan, Wuxi, Changsha, Chengdu, Guangzhou and Xi'an. Our company has more than 300 employees, of which 40% are college graduates, 10% are masters and above, and 20% are professional and technical personnel.
The company has long focused on the research, development, manufacturing and sales of environmental friendly equipment manufacturing, and is committed to become the world's leading resource recovery and recycling system solution and complete equipment integrated service provider. The business covers 5 section steel scrap processing, dismantling of ELV, separation of nonferrous metal, comprehensive use of renewable resources, environmental protection and energy conservation, covering key industries such as steel, automobiles, non-ferrous metals, resource recycling, environmental protection, formed a strategic partnership with many well-known enterprises at home and abroad, and has a good reputation in the industry. Under the guidance of the national One Belt and One Road strategy, we will expand friendly cooperation, enhance exchanges, and discuss the "green development" plan.
In the future, Hubei Lidi will take the road of joint, cross-border and innovative international development under the leadership of the general manager of Li Mingbo. As always, we are committed to the implementation of environmental protection equipment, complete, intelligent, refined, information, environmental friendly and harmless, promote the development and upgrading of the environmental protection equipment industry, and build a "beautiful world" to achieve a sustainable future.
Development direction: Technology research and development, program provision, equipment manufacturing and operation services in the field of comprehensive utilization of solid waste and renewable resources. Providing powerful & innovative solutions, equipment and service for solid waste and renewable resources.
Corporate Strategy: Integrate industry resources. Pay attention on five sectors such as steel scrap processing, automotive dismantling, non-ferrous metal processing and sorting, renewable resources, environmental protection and energy saving . Master core technology, implement brand strategy, standard design, modular manufacturing to become the world's leading resources recycling system solutions and integrated equipment operations and service providers. Dedicated in 5 industry sectors: steel scrap processing, vehicle dismantling, non-ferrous metal processing and sorting, renewable resources and environment protection and energy saving.To be the world leading providers in the recycling industry.
Corporate culture: Integrity Innovation, Unity Struggle, Employee-oriented, Service Customers
Audited Supplier 
){kind=link}